From 1da73fb60964a92442d66454265897259120582a Mon Sep 17 00:00:00 2001
From: Loic Guegan <manzerberdes@gmx.com>
Date: Wed, 24 Apr 2019 16:49:40 +0200
Subject: Add simulation scripts

---
 ns3-simulator/modules/modules.hpp | 94 ---------------------------------------
 1 file changed, 94 deletions(-)
 delete mode 100644 ns3-simulator/modules/modules.hpp

(limited to 'ns3-simulator/modules/modules.hpp')

diff --git a/ns3-simulator/modules/modules.hpp b/ns3-simulator/modules/modules.hpp
deleted file mode 100644
index c43ce41..0000000
--- a/ns3-simulator/modules/modules.hpp
+++ /dev/null
@@ -1,94 +0,0 @@
-
-
-#ifndef MODULES_HPP
-#define MODULES_HPP
-
-#include "ns3/command-line.h"
-#include "ns3/config.h"
-#include "ns3/string.h"
-#include "ns3/log.h"
-#include "ns3/yans-wifi-helper.h"
-#include "ns3/ssid.h"
-#include "ns3/mobility-helper.h"
-#include "ns3/on-off-helper.h"
-#include "ns3/yans-wifi-channel.h"
-#include "ns3/mobility-model.h"
-#include "ns3/packet-sink.h"
-#include "ns3/packet-sink-helper.h"
-#include "ns3/udp-echo-helper.h"
-#include "ns3/tcp-westwood.h"
-#include "ns3/internet-stack-helper.h"
-#include "ns3/ipv4-address-helper.h"
-#include "ns3/ipv4-global-routing-helper.h"
-#include "ns3/constant-position-mobility-model.h"
-#include "ns3/energy-module.h"
-#include "ns3/wifi-radio-energy-model-helper.h"
-#include "ns3/point-to-point-helper.h"
-#include "ns3/ecofen-module.h"
-
-// C++ library
-#include <iostream> // Why not ?
-#include <utility>  // To use std::pair
-#include <iomanip>  // To use std::setw
-
-// WIFI Energy Values
-#define BASICENERGYSOURCEINITIALENERGYJ 1000
-#define BASICENERGYSUPPLYVOLTAGEV 3.3
-#define TXCURRENTA 0.38
-#define RXCURRENTA 0.313
-#define IDLECURRENTA 0.273
-
-// Cloud Energy Values
-#define ONCONSO 0
-#define OFFCONSO 0
-#define IDLECONSO 0
-#define RECVBYTEENERGY 10
-#define SENTBYTEENERGY 10
-#define RECVPKTENERGY 10
-#define SENTPKTENERGY 0
-
-using namespace ns3;
-
-// ---------- Data types ----------
-typedef std::pair<NodeContainer,NodeContainer> CellNodes; // Format (APNode, SensorsNodes)
-typedef std::pair<NetDeviceContainer,NetDeviceContainer> CellNetDevices; // Format (APNetDev, SensorsNetDev)
-typedef std::pair<CellNodes,CellNetDevices> Cell;
-typedef std::pair<Ipv4Address,int> EndPoint; // Format (IP,Port)
-typedef std::pair<NodeContainer,EndPoint> CloudInfos; // Format (CloudHops,CloudEndPoint), here data sent to CloudEndPoint
-
-
-// ---------- platform.cc ----------
-/**
- * Create a WIFI cell paltform composed of nbSensors sensors and ap as an access point
- */
-Cell createCell(uint32_t nbSensors, Ptr<ns3::Node> ap);
-/**
- * Build P2P network composed of nbHop hops (to simulate edge->cloud communications)
- * Note: Cloud Servers are not considered here and completely ignored !
- */
-CloudInfos createCloud(int nbHop, uint32_t bandwidth, uint32_t latency);
-/**
- * Setup simulation scenario on the platforms. Sensors in cell will send packets of sensorsPktSize size every
- * sensorsSensInterval second to the cloud using cloudInfos.
- */
-void setupScenario(Cell cell, CloudInfos cloudInfos, int sensorsPktSize, int sensorsSendInterval);
-
-
-// ---------- energy.cc ----------
-/*
- * Configure WIFI energy module for cell
- */
-void setupCellEnergy(Cell cell);
-/*
- * Configure link/port energy using ecofen
- */
-void setupCloudEnergy(CloudInfos cloudInfos);
-
-
-// ---------- callbacks.cc ----------
-void PktReceived(std::string nodeName,Ptr< const Packet > packet, const Address &address);
-void EnergyUpdated(std::string nodeName,double oldValue, double newValue);
-
-
-
-#endif
-- 
cgit v1.2.3