From 89d815f81ec2d928feab2296bb29dc085b4d2d69 Mon Sep 17 00:00:00 2001
From: Loic Guegan <manzerberdes@gmx.com>
Date: Fri, 26 Apr 2019 11:13:36 +0200
Subject: Debug+Do Simulations

---
 ns3-simulations/simulator/modules/modules.hpp | 100 ++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 ns3-simulations/simulator/modules/modules.hpp

(limited to 'ns3-simulations/simulator/modules/modules.hpp')

diff --git a/ns3-simulations/simulator/modules/modules.hpp b/ns3-simulations/simulator/modules/modules.hpp
new file mode 100644
index 0000000..ec823c9
--- /dev/null
+++ b/ns3-simulations/simulator/modules/modules.hpp
@@ -0,0 +1,100 @@
+
+
+#ifndef MODULES_HPP
+#define MODULES_HPP
+
+#include "ns3/command-line.h"
+#include "ns3/config.h"
+#include "ns3/string.h"
+#include "ns3/log.h"
+#include "ns3/yans-wifi-helper.h"
+#include "ns3/ssid.h"
+#include "ns3/mobility-helper.h"
+#include "ns3/on-off-helper.h"
+#include "ns3/yans-wifi-channel.h"
+#include "ns3/mobility-model.h"
+#include "ns3/packet-sink.h"
+#include "ns3/packet-sink-helper.h"
+#include "ns3/udp-echo-helper.h"
+#include "ns3/tcp-westwood.h"
+#include "ns3/internet-stack-helper.h"
+#include "ns3/ipv4-address-helper.h"
+#include "ns3/ipv4-global-routing-helper.h"
+#include "ns3/constant-position-mobility-model.h"
+#include "ns3/energy-module.h"
+#include "ns3/wifi-radio-energy-model-helper.h"
+#include "ns3/point-to-point-helper.h"
+#include "ns3/ecofen-module.h"
+#include "ns3/node-list.h"
+#include "ns3/flow-monitor-module.h"
+
+// C++ library
+#include <iostream> // Why not ?
+#include <utility>  // To use std::pair
+#include <iomanip>  // To use std::setw
+
+// ECOFEN
+#define ECOFEN_LOG_UNTIL 100
+#define ECOFEN_LOG_EVERY 0.1
+
+// WIFI Energy Values
+#define BASICENERGYSOURCEINITIALENERGYJ 10
+#define BASICENERGYSUPPLYVOLTAGEV 3.3
+#define TXCURRENTA 0.38
+#define RXCURRENTA 0.313
+#define IDLECURRENTA 0.273
+
+// Cloud Energy Values
+#define ONCONSO 0
+#define OFFCONSO 0
+#define IDLECONSO 1
+#define RECVBYTEENERGY 3.4
+#define SENTBYTEENERGY 3.4
+#define RECVPKTENERGY 192.2
+#define SENTPKTENERGY 192.2
+
+using namespace ns3;
+
+// ---------- Data types ----------
+typedef std::pair<NodeContainer,NodeContainer> CellNodes; // Format (APNode, SensorsNodes)
+typedef std::pair<NetDeviceContainer,NetDeviceContainer> CellNetDevices; // Format (APNetDev, SensorsNetDev)
+typedef std::pair<CellNodes,CellNetDevices> Cell;
+typedef std::pair<Ipv4Address,int> EndPoint; // Format (IP,Port)
+typedef std::pair<NodeContainer,EndPoint> CloudInfos; // Format (CloudHops,CloudEndPoint), here data sent to CloudEndPoint
+
+
+// ---------- platform.cc ----------
+/**
+ * Create a WIFI cell paltform composed of nbSensors sensors and ap as an access point
+ */
+Cell createCell(uint32_t nbSensors, Ptr<ns3::Node> ap);
+/**
+ * Build P2P network composed of nbHop hops (to simulate edge->cloud communications)
+ * Note: Cloud Servers are not considered here and completely ignored !
+ */
+CloudInfos createCloud(int nbHop, uint32_t bandwidth, uint32_t latency);
+/**
+ * Setup simulation scenario on the platforms. Sensors in cell will send packets of sensorsPktSize size every
+ * sensorsSensInterval second to the cloud using cloudInfos.
+ */
+void setupScenario(Cell cell, CloudInfos cloudInfos, int sensorsPktSize, int sensorsSendInterval);
+
+
+// ---------- energy.cc ----------
+/*
+ * Configure WIFI energy module for cell
+ */
+void setupCellEnergy(Cell cell);
+/*
+ * Configure link/port energy using ecofen
+ */
+void setupCloudEnergy(CloudInfos cloudInfos);
+
+
+// ---------- callbacks.cc ----------
+void PktReceived(std::string nodeName,Ptr< const Packet > packet, const Address &address);
+void EnergyUpdated(std::string nodeName,double oldValue, double newValue);
+
+
+
+#endif
-- 
cgit v1.2.3